Creating And Configuring Workgroups; Overview Of Workgroup Configuration Window - Altigen AltiWare ACC 5.1 Administration Manual

Promoted call priority can carried be to another ACM system over VoIP tie trunk.
•

Creating and Configuring Workgroups

T
he Workgroup Configuration window provides for creating workgroups, setting their
attributes, and assigning group members. To open the Workgroup Configuration
window, select Call Center > Workgroup Configuration.
Figure 1. Workgroup Configuration window, General tab

Overview of Workgroup Configuration Window

These are the tabs in the Workgroup Configuration window:
General—create workgroup pilot numbers, group descriptions, service level
•
threshold and call recording options.
Group Member—add or remove members from workgroups
•
Mail Management—set capacity and features options for extension mailboxes.
•
Notification—set preferences and options for voice mail notifications.
•
Call Handling—set call forwarding, call waiting, and call handling preferences and
•
options.
Queue Management—set queue phrases, overflow routing, queue announcements
•
and queue quit option.
Apply to Button
The Workgroup Configuration window often allows you to apply changes to a particular
workgroup or to select many workgroups to which to apply the changes.
192
AltiWare ACC 5.1 Administration Manual