Serial Console - Alcatel-Lucent OmniTouch Administration Manual

Management Actions
............................................................................................................................................................................................................................................................
Note:
*.ab, *.ac, etc. The filenames will appear on the Administration screen. You must
locate (by using the
After all files are uploaded, the server automatically restores, and after restoration, the
system will reboot.
........................................................................................................................................................................................................................
Log into the Serial Administration console again, on the New Secondary server:
5
Username: admin
Password: changeme
Figure 3-10 Serial Console
........................................................................................................................................................................................................................
Configure any required networking information.
6
a. Select
b. Select the
c.
Figure 3-11 Use DHCP
d. Configure your network appropriately.
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
There may be multiple files with the following sequential extensions: *.aa,
Browse
Networking Configuration
Configure TCP/IP network parameter
appears. Select
Use DHCP
To restore configuration settings on the new Secondary
button) and upload each individual file.
.
or and press Enter.
Yes No
item.
server
3 - 1 7