Alcatel-Lucent OmniTouch Administration Manual page 129

System Configuration
............................................................................................................................................................................................................................................................
a. Shut down the Windows virtual machine by selecting
Important!
b. After the virtual machine is off, double-click the Hard Disk line (under Devices).
c. Click the
d. Leave the
e. Click
f. Click
g. Close the TightVNC window.
........................................................................................................................................................................................................................
Mark the installation as completed.
9
a. Return to the Web Administration window on the client workstation. Select
b. Locate the box labeled
Note:
when OmniTouch ACS is powered on.
c. Select
........................................................................................................................................................................................................................
Test the new document sharing virtual machine.
10
When the server has rebooted, two tests should be performed.
a. Log into the Web Administration and select
Note:
state. All servers and watchdogs should eventually become green.
b. Using Internet Explorer on any client workstation, log into OmniTouch ACS as a
E
N D
........................................................................................................................................................
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
Start–>Turn Off Computer
Do NOT use the VMware Power Off button.
Advanced...
as
Mode Independent
changes made are discarded on Power Off.
on the
OK Advanced Hard Disk Options
for the
OK Virtual Machine Settings
Configuration–>Advanced Settings–>Construct Document Conversion VM
at the bottom of the page. Click the
Construction
button in the resulting dialog box.
OK
If you forget step 9.b, parts of the Document Conversion system will not start
Configuration–>Shutdown
server.
certain both the VMware Status and the Watchdog Status are 0/green.
It may take up to 5 minutes for the virtual machine to initialize to a ready
user. Select
Make a Presentation
documents (Word, Excel, and Powerpoint).
O S
F T E P S
and click
Turn Off
button in the lower right corner.
and select the
page.
Step 4: Complete or Cancel Document Conversion VM
and click the
Monitoring–>Server Status
and share one of each of the supported type of
To construct document conversion VM
.
radio button so
Nonpersistent
page.
button and click the
Complete
button to restart the
Restart
.
. Make
2 - 1 0 9