Alcatel-Lucent OmniTouch Administration Manual page 213

Provisioning and Account Management
............................................................................................................................................................................................................................................................
Project Code
Call ID
Called Number
Server
Trunk Number
Channel Number
Leg Call ID
Leg Type
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
To generate a call report for a particular user
A text string needed to schedule a conference.
(may be used for billing purposes)
Internal, unique ID for a specific call.
Ad Hoc call: Each call generates a new
•
Call ID.
•
Scheduled and Reservationless
Conference calls: Use same Call ID for
each access.
Call IDs must not contain the @
Note:
character.
Incoming number dialed by user (DNIS: Dialed
Number Identification Service). Typically used
by Call Centers with different numbers for
different services.
In a single server configuration, the server name
will be the same on multiple calls; in a multi-
server configuration, the server name may be
different on multiple calls. (useful for
troubleshooting)
Only appears for systems with built-in gateway
cards. (0-7)
Derived from a particular trunk; reported by the
Gateway card.
The number of actual channels per trunk is as
follows:
T1 with PRI signaling – 23
•
T1 with CAS – 24 (Note that Direct
•
Inward Dialing, DID, is supported.)
E1 with PRI – 30
•
Call ID of an audio leg for VoIP or call ID of part
of application sharing session if Leg Type is
AppShare or call ID of part of video session if
Leg Type is Video.
Audio, Application Sharing, or Video.
4 - 4 5