Configure Collaboration Subnet; To Change The Ip Range - Alcatel-Lucent OmniTouch Administration Manual

System Configuration
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
Enter the IP address and port where the messages are to be sent in the
6
Hostname
........................................................................................................................................................................................................................
Click the
7
E
N D
........................................................................................................................................................
Note:
alerts and alarms will remain in a queue on the OmniTouch ACS. Periodically, they
will be retransmitted to the OmniTouch Unified Communications alarm server until
the queue is emptied.

Configure collaboration subnet

This allows a change to the IP range if there is a conflict with the Local Network
environment where the subnet is installed.

To change the IP range

........................................................................................................................................................................................................................
Return to the Welcome Screen.
1
........................................................................................................................................................................................................................
Click the
2
........................................................................................................................................................................................................................
Click the
3
........................................................................................................................................................................................................................
Click the
4
The first three octets of a Subnet Address appear.
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
and
Alarm Server Port
button.
Save
O S
F T E P S
If the OmniTouch Unified Communications alarm server is unreachable,
tab.
Configuration
Advanced Settings
Collaboration Subnet
fields.
item.
item.
Configure collaboration subnet
Alarm Server
2 - 9 9