System Configuration
............................................................................................................................................................................................................................................................
Figure 2-37 Backup Settings Verification
........................................................................................................................................................................................................................
If you receive no error messages, click
11
If you receive an error message, check the backup server path.
E
N D
........................................................................................................................................................
Using a dedicated NIC card for backups
If your ACS server has a separate NIC card for backups, you need to configure ACS to use
this card to send data to the destination location.
To configure a separate NIC card for backups
........................................................................................................................................................................................................................
Click the
1
........................................................................................................................................................................................................................
Click the
2
........................................................................................................................................................................................................................
Enter the
3
Do not assign any
........................................................................................................................................................................................................................
Click
4
Configuration–>Advanced Settings–>Route Management
........................................................................................................................................................................................................................
Add the subnet and force routing through this additional Ethernet interface.
5
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
O
S
F
T E P S
tab.
Configuration
item.
TCP/IP Settings
and
IP Address
Net Mask
or
SIP
RTP
.
Save
of the additional Ethernet interface.
use.
Using a dedicated NIC card for backups
.
2 - 7 1