Using A Static Ip Address; Serial Administrator Console Main Menu - Alcatel-Lucent OmniTouch My Teamwork Installation Manual

Installation Instructions
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
The main menu for the server console will appear. Using the up/down arrow keys, scroll to
2
the
Network Configuration
Figure 3-14 Serial Administrator Console Main Menu
Note:
respond
........................................................................................................................................................................................................................
On the next screen (Use DHCP), respond
3
Address".

Using a Static IP Address

On the next screens, enter your TCP/IP parameters.
a. Enter a valid hostname (for example,
b. Next, enter a valid domain name with extension (for example,
c. Enter the IP address (for example,
d. Enter the netmask (for example,
e. Enter the server's default gateway and select
f. Enter your Name server (DNS) and select
g. Enter an IP address for the primary NTP server (if different from the default) and
............................................................................................................................................................................................................................................................
8AL90213USAC ed 01
September 12, 2008
Alcatel-Lucent strongly recommends that you use a static IP address. If you
to using DHCP , proceed to section "Using DHCP".
Yes
y ou r co mp a ny . co m
select .
OK
1 The "+" indicates that more menu items are available by scrolling the display using the up and down arrow
keys. See Appendix E in the OmniTouch ACS Administration Guide for a full explanation of the serial
console application.
menu choice, and select
and proceed to section "Using a Static IP
No
yo ur s er v er 1
) and select OK.
19 2 .1 68 . 10 .1 4 0
25 5. 2 55 . 25 5. 0
OK
Using a Static IP Address
by pressing the
OK Enter
) and select
OK
) and select
) and select
OK
.
OK
.
1
key.
.
.
OK
.
3 - 1 1