Alcatel-Lucent OmniTouch Administration Manual page 287

Alert/Alarm Impact
%s tried to N/A
delete local user
%s - remove as
alternate\n
%s tried to add N/A
existing local
user %s -
mark as
alternate.\n
ADM-1001 Music on hold
General parameters
Alert/Info were modified
by an Admin
user.
ADM-1002 System
Parameters
General
were modified
Alert/Info
by an Admin
user.
ADM-1003 Phone trunk
parameters
General
were modified
Alert/Info
by an Admin
user.
ADM-1004 Network
parameters
General
were modified
Alert/Info
by an Admin
user.
ADM-1005 MGCP
parameters
General
were modified
Alert/Info
by an Admin
user.
Severity Description
Informational This alert is raised if the
database in a stacked pair
contains any inconsistency
when synchronizing.
Informational This alert is raised if the
database in a stacked pair
contains any inconsistency
when synchronizing.
Informational Music on hold parameters
were modified by an Admin
user using the web admin
tool.
Informational System parameters were
modified by an Admin user
using the web admin tool.
Informational Phone trunk parameters
were modified by an Admin
user using the web admin
tool. Incorrectly configured
parameters could cause a
loss of dial out ability.
System will drop calls
active on the PSTN board
when this change is
processed.
Informational Network parameters were
modified by an Admin user
using the web admin tool.
Incorrectly configured
parameters could cause a
loss of connectivity to the
server.
Informational MGCP parameters were
modified by an Admin user.
Instance Action
%s tried to delete No immediate action
local user %s - remove required. Check user
as alternate\n databases.
%s tried to add No immediate action
existing local user %s required. Check user
- mark as databases.
alternate.\n
Music on hold No action needed.
parameters were set
by $ADMIN
System parameters No action needed.
set by $ADMIN
Phone trunk No action needed.
parameters set by
$ADMIN. Restarting
phone trunk server
and conference server
at $now
Network parameters No action needed.
have been set by
$ADMIN
MGCP parameters No action needed.
have been set by
$ADMIN.