Trunk Status; Site Connections; Viewing Trunk Status - Alcatel-Lucent OmniTouch Administration Manual

Monitoring
............................................................................................................................................................................................................................................................

Trunk status

The trunk status screen shows the status ("in service" or "down") and the number of
active channels for each PSTN trunk on the server. The menu option is hidden if there are
no trunks installed. Should a trunk need to be serviced, it can be quiesced and
subsequently restarted by clicking on the
Quiesce
already on that trunk. Clicking
Clicking on the trunk number displays the active legs for that trunk.
Note:
configuration.
The administrator can select the refresh frequency rate by selecting one of the following:
• Refresh Once
helpful when you have a large group of users.
• Refresh every 30 seconds
• Refresh every 60 seconds
• Refresh every 90 seconds
Figure 5-11 Viewing Trunk Status

Site connections

Alcatel-Lucent OmniTouch Advanced Communications Servers (ACS) may be deployed
in a distributed configuration of multiple sites. Each server in a site is configured with
information about other sites with which it can establish distributed conferences. The
names of the other sites with which a specific server is "federated" are shown in the
Remote Sites
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
disables the trunk for additional users, but does not disconnect users who are
The number of available trunks displayed will vary according to your
– This creates a 'snapshot' of the trunk status at a moment in time. It is
list, along with the number of registered users on this server.
button corresponding to that trunk.
Enable
disconnects the users.
Disable
Trunk status
5 - 1 3