Tcp/Ip Settings; To Configure The Tcp/Ip Information For Omnitouch Acs - Alcatel-Lucent OmniTouch Administration Manual

System Configuration
............................................................................................................................................................................................................................................................

To configure the TCP/IP information for OmniTouch ACS

........................................................................................................................................................................................................................
Click the
1
........................................................................................................................................................................................................................
Click the
2
........................................................................................................................................................................................................................
Verify or provide the correct settings on the
3
Note:
– refer to the Alcatel-Lucent OmniTouch My Teamwork Unified Conferencing and
Collaboration Application Installation Guide.
Table 2-1 TCP/IP Settings
IP Address
Netmask
Default Gateway
Web Server Name
Hostname
Domain Name
Primary/Secondary NTP Server
Primary/Secondary Name Server
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
tab.
Configuration
item.

TCP/IP Settings

All of the following values should be the same as those set during installation
To configure the TCP/IP information for OmniTouch ACS
page.
TCP/IP Settings
The address assigned during installation. IP
address settings may be changed at any time by
entering the new TCP/IP settings and clicking
the Save button.
Mask used to divide the IP address into
subnets.
The Gateway assigned during installation.
This is the URL users will enter to access the
server from their browsers. (It is typically the
hostname.domain name.)
This is the valid hostname (for example,
yourserver1) that was assigned during
installation.
This is the valid domain name with extension
(for example, yourcompany.com) that was
assigned during installation.
A Network Time Protocol (NTP) server is
required for successful operation of your
Alcatel-Lucent OmniTouch Advanced
Communications server.
The Name server (DNS) assigned during
installation.
2 - 7