Automated Message Delivery; Amds Settings - Alcatel-Lucent OmniTouch Administration Manual

System Configuration
............................................................................................................................................................................................................................................................
To configure the settings of the Automated Message
Delivery System
........................................................................................................................................................................................................................
Click the
1
........................................................................................................................................................................................................................
Click the
2
The Automated Message Delivery Settings page appears.
Figure 2-63 Automated Message Delivery
The settings are described in the following table.
Table 2-21 AMDS Settings
Enable
Max Ports
Maximum Retry Count
Retry Delay Time
Logging Level
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
tab.
Configuration
Automated Message Delivery Settings
To configure the settings of the Automated Message
item.
Checking this enables the Automated Message
Delivery capability and makes it accessible to
users who are designated 'AMDS users (see
Manage user settings).
This sets the maximum number of DS0s (Digital
Signal, Level 0) on the server that can be
accessed by the Automated Message Delivery
System capability. If conferences are expected to
take place at the same time as messages are
being delivered, you will want to set this number
below the maximum number of server ports, or
conference users may find all ports occupied by
outgoing messages.
This sets the maximum number of retries
allowed for delivery of a message.
This sets the time allowed (in seconds) between
retries of a message delivery.
1=default; 2=debug; 3=trace.
Delivery System
2 - 1 1 3