Change Password; Change Password; Reset Certificate/Key Pair; Revert Server Software - Alcatel-Lucent OmniTouch Administration Manual

............................................................................................................................................................................................................................................................

Change password

This option is used to change the password to the serial port console (not the browser-
based administration interface). The username remains admin.
Figure E-2 Change Password

Reset certificate/key pair

This option is used to reset the certificate/key pair to the original that shipped with the
server. Generally, if you have installed your own security certificate, you will not use this
option.

Revert server software

This option is used to re-install the most recently installed version of OmniTouch ACS
software (the version which is currently running). This process also erases all stored data
and restores the configuration to the default. Generally, if you have applied updates or
upgrades, you should not use this option.

Restore configuration

This option restores the server configuration to its initial "factory" settings. If you have
applied configuration changes (server host/domain name, IP address, and more)
appropriate to your network environment, you should not use this option.
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
E - 3