A Error Codes And Alarm Conditions - Alcatel-Lucent OmniTouch Administration Manual

A Error Codes and Alarm
Conditions
Overview
Purpose
This appendix differentiates between alarms and alerts through conditions and examples.
Contents
Server Alarm Conditions and Messages
Server Alert Conditions and Messages
Server Alarm Conditions and Messages
No trunks available (trunkalert)
Subject= "ACS alarm" Message= "no phone trunks are operational."
Description: T1/ISDN PRI circuit is out of service.
Server Alert Conditions and Messages
bbmux restart (alert)
Subject= "ACS alert" Message="Blackberry server restart at HH:MM:SS MM/DD/YYYY
Description: A restart of the Blackberry Server at time specified.
ivr restart (alert)
Subject= "ACS alert" Message= "Incoming call server restart at HH:MM:SS
MM/DD/YYYY"
Description: A restart of the Incoming call server at the specified time. Dial-in
conferences are affected by this restart.
mcu restart (alert)
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
A-1
A-1
A - 1