Pstn Trunk Settings; To Configure Pstn Trunk Settings - Alcatel-Lucent OmniTouch Administration Manual

Advanced communication server (acs)
Table of Contents

Advertisement

System Configuration
............................................................................................................................................................................................................................................................
Note:
character is an underscore (_). Refer to the following Microsoft® technote found at
http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q275033
"Cookies Are Not Saved If the Host Name Is Invalid."
........................................................................................................................................................................................................................
If you have more than 2 interfaces (up to eth09), provide the
4
each additional interface in the grid that appears. Indicate if the interface will route
information using SIP or RTP .
Note:
a NIC card that is currently being used to route information.
........................................................................................................................................................................................................................
Click the
5
E
O
N D
........................................................................................................................................................

PSTN trunk settings

You can configure the T1 or E1 trunks attached to your server.
Note:
this menu choice will not be shown.

To configure PSTN trunk settings

........................................................................................................................................................................................................................
Select the
1
........................................................................................................................................................................................................................
Select the
2
The telephone
............................................................................................................................................................................................................................................................
2 - 8
Ensure that your Domain Name contains valid characters. An invalid
You must reassign routing (SIP or RTP) to another interface before removing
button.
Save
S
F
T E P S
If your server is VoIP only, and does not use PSTN trunks for voice traffic,
tab.
Configuration
PSTN Trunk Settings
Global Parameters
item.
page appears.
PSTN trunk settings
and
IP Address
Netmask
8AL90208USAD ed01
November 20, 2008
for

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnitouch advanced communication server 7.1.4

Table of Contents