Tcp/Ip Settings Page With Eth0 And Eth01 Interfaces; Tcp/Ip Settings With More Than Two Ethernet Interfaces - Alcatel-Lucent OmniTouch Administration Manual

System Configuration
............................................................................................................................................................................................................................................................
inaccessible to browsers. Should that happen, you must use the console (accessible
through the server's video/keyboard or serial port) to set a valid IP address, (refer to the
Alcatel-Lucent OmniTouch Unified Communication My Teamwork Installation Guide).
You must restart the system as soon as possible when making changes to the IP
configuration. The use of DHCP is only for specialized situations – generally the server
should be set up with a static IP address. Contact your support representative if you want
to use this feature.
Figure 2-2 TCP/IP Settings Page with Eth0 and Eth01 Interfaces
Figure 2-3 TCP/IP Settings with More Than Two Ethernet Interfaces
You should maintain a record of TCP/IP information and keep it for backup purposes.
............................................................................................................................................................................................................................................................
2 - 6
TCP/IP settings
8AL90208USAD ed01
November 20, 2008