Pass/Fail Screen Examples
The following illustrations show some of the typical detailed screens with
Pass/Fail test results.
Pass/Fail: Peak TX Power
This function measures and analyzes three peak transmission power levels against
the limits set on the Test Condition screen in the CONFIGURATION mode. The
actual measured data are shown with vertically enlarged numerals. Any data
indicating a failure is highlighted.
Figure 3-15
Failed: Peak TX Power Screen
Softkey Menu
o Print: Allows you to print a hardcopy of a graphic image from the screen.
o Return: Displays the Pass/Fail screen.
Chapter 3
Screen Reference
AUTOMATIC TEST
75