Screen Reference
AUTOMATIC TEST
Explanation
Detailed test results up to the aborted operation can be obtained for further
analysis. Place the circular cursor at one of the Pass/Fail cells and press the
CURSOR CONTROL knob once to get detailed test results.
The Test Set is reset to the state of the AUTOMATIC TEST: Stand-by screen. The
MS Call state is not ensured, therefore the MS power-on process needs to be
repeated for a new test.
Other information related to the mobile are also displayed in either simplified or
detailed screen. Refer to
72
o Return: Displays the initial screen with function modes.
"Screen Fields" on page
70.
Chapter 3