Table of Contents
Advertisement
How to Update the Firmware
If Update is set to On and a firmware update card is inserted in the MEMORY
CARD slot, the version number of the firmware on the card is displayed in the
New Firmware field. If a firmware update card is not inserted or an improper card
is inserted, "?.??.??" is shown in this field.
Figure 3-65
Firmware Update Screen (1/2)
Softkey Menu
o Yes: Initiates the updating process. When this softkey is pressed with the
o No: Changes from Update: On to Update: Off without updating the current
Figure 3-66
Firmware Update Screen (2/2)
Softkey Menu
o OK: Begins updating the firmware to the new revision. Following the
Chapter 3
proper update card inserted, the screen shown in
firmware.
update card #1, it is required to insert the update card #2 according to the
operation message.
After completing the update process, the Test Set reboot to display the
initial screen.
Screen Reference
CONFIGURATION
Figure 3-66
is displayed.
165
Advertisement
Table of Contents
