Figure 3-26
Aborted: Peak TX Power/Burst Timing/Power Ramp Screen
Figure 3-27
Aborted: Peak TX Power/Burst Timing/Power Ramp Zoomed Screen
Softkey Menu 1
o Start: Begins a new measurement cycle with either single or continuous
o Trigger Sing/Cont: Toggles the trigger mode between Sing for single and
o Zoom Off/On: Toggles the zooming function between Off and On. If On is
o More (1 of 3): Displays softkey menu 2.
o Return: Returns to the Talk/RF Test Measuring screen.
Softkey Menu 2
o Knob MKR/Cursor: Toggles the function of the CURSOR CONTROL knob
Chapter 3
trigger mode.
Cont for continuous modes. In the continuous mode, this softkey is
highlighted blinking until the Abort softkey is pressed. In the single mode,
this softkey is highlighted for one measurement cycle and the marker
function is available with the Knob MKR/Cursor softkey.
selected, the rising edge, between 8 bits to 0 bits, and trailing edge,
between 147 and 155 bits, of Power Ramp are expanded to observe the
detailed test result as shown in
between Cursor and MKR for marker control.
MANUAL TEST (Synchronous Mode)
Figure
3-27.
Screen Reference
91