Test Parameters, Test Items And Allowable Ranges - Agilent Technologies E6392B User Manual

Screen Reference
General Operation Guide

Test Parameters, Test Items and Allowable Ranges

Depending on the function modes, the Test Set has a number of input fields to be
specified or defined to configure a test flow, test sequence and test condition. The
allowable ranges for those input fields depending on the radio standards are
explained in the following parts of this guide. For a quick overview, refer to
Appendix B, "Input Fields and Allowable Ranges."
Selecting an Input Field and Specifying a Value
All input fields to be specified are highlighted and the circular cursor is blinking in
front of one of them.
To start, first select an input field and then specify a value to that input field by the
following procedure:
Step 1. Rotate the CURSOR CONTROL knob clockwise to move the cursor downward or
right, or rotate it counterclockwise to go upward or left, and place it at the input
field you want to change.
Step 2. Press the CURSOR CONTROL knob once. The input field blinks, while the
circular cursor stops blinking.
Step 3. Rotate the CURSOR CONTROL knob clockwise or counterclockwise to see the
values defined for it.
Step 4. Press the CURSOR CONTROL knob to enter the desired value in the input field.
The input field stops blinking and the circular cursor begins blinking again.
58 Chapter 3