Agilent Technologies E6392B User Manual page 61

Screen Reference
General Operation Guide
Recalling the Numeric Values
Step 1. Move the cursor to one of the numeric input fields of channels, input/output levels,
or power controls.
Step 2. Upon selecting the field by pressing the CURSOR CONTROL knob, the softkey
menu shown in the following figure is activated. The two memory softkeys show
the values previously stored in the memories if any.
Step 3. Press the Memory1 or Memory2 softkey to enter the stored value to the field.
Step 4. The value is entered to the field and the softkey menu returns to that of
Variable Increment Softkey
Upon placing the circular cursor at an input field, such as channel number or level,
that accepts a numeric value, one softkey with the variable increments is activated
as shown in the previous illustration.
Pressing this increment softkey changes the multiplier from 1 to 1000, and each
click of the knob varies the value by an increment specified by the increment
softkey. The following multipliers are available for selection:
•
•
•
•
60
1: Enables an increment of 1.
10: Enables an increment of 10.
100: Enables an increment of 100.
1000: Enables an increment of 1000.
Step 1.
Chapter 3