Protocol compliance test card for pci express (52 pages)
Summary of Contents for Agilent Technologies E5023U
Page 1
Agilent E5023U Upgrade Kit Upgrade Manual Third Edition Software Revision This manual applies directly to system which has the software revision B.01.00 and above Part No. E5023-90311 March 2003 Printed in Japan...
Page 2
This document contains proprietary information that is protected by copyright.All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of the Agilent Technologies, Inc. Agilent Technologies Japan, Ltd.
This manual provides the information to upgrade the E5022A/B (600 M / 750 M / 1 Gbps) to the E5023A (1.5 Gbps) or upgrade the E5023A (1.5 Gbps) to the E5023A (2.6 Gbps), using the E5023U Upgrade Kit. Required Items for Installation The following items are required for installation.
Introduction Required Items for Installation Required Software Table 1-2 Required Tools Name Description E5022/E5023 System Software Revision B.01.00 and above, for upgrading to E5023A Option 415 (1.5 Gbps) Revision B.03.00 and above, for upgrading to E5023A Option 426 (2.6 Gbps) caltool.exe E5023A Calibration Tool Software.
Page 8
Introduction Required Items for Installation Chapter 1...
Upgrade Procedure Introduction Introduction This section explains how to upgrade the E5022A/B (600 M / 750 M / 1 Gbps) to E5023A (1.5 Gbps) or the E5023A (1.5 Gbps) to the E5023A (2.6 Gbps). The upgrade procedure is shown below. Step 1.
Upgrade Procedure Step 1: Checking the E8491A serial number Step 1: Checking the E8491A serial number If the serial number of the E8491A IEEE-1394 PC Link to VXI is US39000231 and below, the modification is required. remove clamping diodes CR401, CR402, Open the side cover of the E8491 and CR403 and CR404 using a soldering iron.
Upgrade Procedure Step 2: Installing the Backplane Connector Step 2: Installing the Backplane Connector Remove the modules from the VXI mainframe and install the backplane connectors. Figure 2-1 Installing the Backplane Connector Chapter 2...
Upgrade Procedure Step 3: Installing new Components for E5023A Step 3: Installing new Components for E5023A Install the Modules in the VXI mainframe. Exchange the old modules with the new modules. The old modules are no longer necessary. Table 2-1Old and new modules (upgrade to E5023A Opt. 415, 1.5 Gbps) Old Modules New Modules E5035A...
Upgrade Procedure Step 4: Connecting Cables Step 4: Connecting Cables Connect the cables between modules. Cable Connection of E5023A Option 415 (1.5 Gbps) See Table 2-3 and Figure 2-2. When the system has the E5029K Option 001, see Table 2-4 and Figure 2-3.
Upgrade Procedure Step 4: Connecting Cables Cable Connection of E5023A Option 426 (2.6 Gbps) See Table 2-6 and Figure 2-5. When the system has the E5029K Option 001, see Table 2-7 and Figure 2-6. When the system has the 4395A, see the Table 2-8 and the Figure 2-7. Table 2-6 Cable Connection of E5023A Opt.
Page 21
Upgrade Procedure Step 4: Connecting Cables Table 2-6 Cable Connection of E5023A Opt. 426 (2.6 Gbps) (VXI Modules) Description Connection Part No. GPIB Cable, 2m GPIB Port on PCI Board 54845A GPIB port 10833B GPIB Adapter Extender 10834A BNC(m)-BNC(m) Cable E5035 “Index In”...
Upgrade Procedure Step 5: Uninstalling the E5022A/B System Software from your PC Step 5: Uninstalling the E5022A/B System Software from your PC You had better to uninstall the old system software before installing a new system software. This is because the structure of the start menu and some register information have been changed and the uninstaller of the new system software might not delete them.
Import Export Step 8: Put the Upgrade Model Label on the VXI Mainframe Put the label “E5023U UPGRADE PRODUCT Equivalent to E5023A” on the rear panel of the VXI Mainframe. Chapter 2...
Page 26
Upgrade Procedure Step 8: Put the Upgrade Model Label on the VXI Mainframe Chapter 2...