Agilent Technologies E6392B User Manual page 141

Screen Reference
SPECTRUM MONITOR
Measuring Screens
If the Start softkey is pressed in the initial screen, the following Measuring screen
with either 0 to 400 kHz or ±100 kHz span is displayed with the continuous trigger
mode.
Figure 3-56 Measuring: Span 0 to 400 kHz Screen
Figure 3-57 Measuring: Span 100 kHz Screen
140
Softkey Menu
o Trigger Sing/Cont: Toggles the trigger mode between Sing for single and
Cont for continuous modes. In the continuous mode, this softkey is
highlighted blinking until the Abort softkey is pressed. In the single mode,
this softkey is highlighted for one measurement cycle.
o Abort: Stops continuous measurements and shows another softkey menu.
Chapter 3