Table of Contents
Advertisement
Using Functions
Testing a Mobile with MANUAL TEST (GPRS mode)
Step 13. Press the Start softkey, then the screen changes to the following MANUAL TEST:
Measuring screen, while the mobile is being processed to attach to the Test Set.
Power Class will be shown first.
Step 14. Upon completion of the attaching process, the MANUAL TEST: Measuring screen
is displayed as shown below.
Step 15. While the Attached step is blinking as above, you can select a test item by the
CURSOR CONTROL knob to execute its measurement. Place the cursor at "Peak
TX Power, Power vs Time" and press the CURSOR CONTROL knob, for
example, to obtain the next screen.
Step 16. Press the Abort softkey to get other softkey menus.
46
Chapter 2
Advertisement
Table of Contents
