Agilent Technologies E6392B User Manual page 128

Figure 3-47 Aborted: Peak TX Power/Power vs Time Screen
Figure 3-48 Aborted: Peak TX Power/Power vs Time Zoomed Screen
Softkey Menu 1
o Start: Begins a new measurement cycle with either single or continuous
o Trigger Sing/Cont: Toggles the trigger mode between Sing for single and
o Zoom Off/On: Toggles the zooming function between Off and On. If On is
o More (1 of 3): Displays softkey menu 2.
o Return: Returns to the initial Measuring screen as shown in
Softkey Menu 2
o Knob MKR/Cursor: Toggles the knob function of CURSOR CONTROL
Chapter 3
trigger mode.
Cont for continuous modes. In the continuous mode, this softkey is
highlighted blinking until the Abort softkey is pressed. In the single mode,
this softkey is highlighted for one measurement cycle and the marker
function is available with the Knob MKR/Cursor softkey.
selected, the rising edge, from 8 bit to 0 bit, and trailing edge, between bits
147 and 155, of the Power Ramp waveforms are expanded to observe the
detailed results as shown in
between Cursor and MKR for marker control.
MANUAL TEST (GPRS Mode)
Figure 3-48.
Screen Reference
Figure 3-45.
127