Agilent Technologies E6392B User Manual page 5

Safety
Symbols
!
|
WARNING:
CAUTION:
NOTE:
DO NOT Substitute Parts Or Modify Instrument
Because of the danger of introducing additional hazards, do not install substitute
parts or perform unauthorized modifications to the instrument. Return the
instrument to an Agilent Technologies Sales and Service Office for service and
repair to ensure that safety features are maintained.
General definitions of safety symbols used on equipment or in manuals are listed
below.
Refer to the instruction manual when you see this symbol.
Alternating current.
Direct current.
On (Supply).
Off (Supply).
In position of push-button switch.
Out position of push-button switch.
This WARNING notice denotes a hazard. It calls attention to a procedure, practice,
condition or the like, which, if not correctly performed or adhered to, could result in
injury or death to personnel.
This CAUTION notice denotes a hazard. It calls attention to a procedure,
practice, condition or the like, which, if not correctly performed or adhered
to, could result in damage to or destruction of part or all of the product.
NOTE denotes important information. It calls attention to a procedure, practice, condition
or the like, which is essential to highlight.
iv