Preface; About This Document; Document Conventions - Intergraph InterServe 800 System Reference Manual

Preface

InterServe 800 System Reference describes how to service and upgrade an InterServe 800
system.

About This Document

InterServe 800 System Reference is organized as follows:
u
Chapter 1, "Accessing the Components," describes how to open and close the case and
how to access internal components.
u
Chapter 2, "Servicing the System," describes how to maintain the components of the
system.
u
Chapter 3, "Upgrading the System," describes how to add components to expand the
system.
u
Chapter 4, "System Hardware," provides a system hardware overview and technical
information on the components of the system.
u
Chapter 5, "System Board," provides technical information specific to the system board.
u
Chapter 6, "Peripherals," provides connector locations for peripheral cables and drives.
u
Chapter 7, "System Specification," provides system configuration summary and
specifications.
u
Appendix A, "Firmware and BIOS Procedures," describes how to install the disk section
firmware and RAID Controller BIOS.

Document Conventions

Bold
Italic
Monospace
SMALL CAPS
+
CTRL D
Commands, words, or characters that you key in literally.
Variable values that you supply, or cross-references.
Output displayed on the screen.
Key names on the keyboard, such as
directories. You can type filenames and directory names in the dialog boxes
or the command line in lowercase unless directed otherwise.
Press a key while simultaneously pressing another key; for example, press
and simultaneously.
CTRL D
, or . Names of files and
D ALT F3
ix