Preface; About This Document; Document Conventions - Intergraph InterServe 800 System Setup

Preface

InterServe 800 System Setup describes setting up and configuring your InterServe 800
system for use. This document also provides information on using the system, configuring
the BIOS, troubleshooting, installing system software, and system power.

About This Document

InterServe 800 System Setup is organized as follows:
u
Chapter 1, "Installing the System," describes how to set up the system hardware.
u
Chapter 2, "Setting Up the Software," describes how to set up the operating system and
associated system software.
u
Chapter 3, "Configuring the System," describes how to configure the system for use.
u
Chapter 4, "Using the System," describes how to use essential system features and
provides other important information.
u
Chapter 5, "Configuring the BIOS," describes how to use AMIBIOS Setup to configure
the system's basic input/output system (BIOS).
u
Chapter 6, "Troubleshooting," describes how to resolve common system problems.
u
Chapter 7, "Installing System Software," describes how to install the operating system
and associated system software, if required.
u
Appendix A, "System Power," describes the system's rated power consumption (load).

Document Conventions

Bold
Italic
Monospace
SMALL CAPS
+
CTRL D
Commands, words, or characters that you key in literally.
Variable values that you supply, or cross-references.
Output displayed on the screen.
Key names on the keyboard, such as
directories. You can type filenames and directory names in the dialog boxes
or the command line in lowercase unless directed otherwise.
Press a key while simultaneously pressing another key; for example, press
and simultaneously.
CTRL D
, or ; names of files and
D ALT F3
ix