Installing Qfe Update Software; Creating An Emergency Repair Disk; Getting Operating System Updates - Intergraph InterServe 80 SL System Setup

40
u
Under PCI/PnP DMA Exclusion, select the ISM card's DMA channel from the list, and
change its status to Reserved.
u
Under PCI/PnP UMB Exclusion, select the ISM card's UMB region from the list, and
change its status to Reserved.
See Chapter 5, "Configuring the BIOS," for more information on using BIOS Setup.

Installing QFE Update Software

If the system was shipped with Quick-Fix Engineering (QFE) update software, you can create
a QFE diskette using Version Manager. QFE update software contains fixes for operating
system problems or limitations on your Intergraph Computer Systems system, and is only
shipped with the system if it is needed. If you have a QFE diskette, insert it into the floppy
disk drive. Refer to the
system.

Creating an Emergency Repair Disk

You should create an Emergency Repair Disk after you finish configuring the system. The
files on the Emergency Repair Disk can restore a damaged registry to its original contents
(that is, at the time Windows NT was installed), along with the standard Windows NT drivers.
Use the
RDISK
Emergency Repair Disk. You can also use these utilities to update the Emergency Repair Disk
any time you change the system's configuration. You should also make and keep a backup
copy of the Emergency Repair Disk.
Refer to the operating system documentation and Help for information on creating and using
an Emergency Repair Disk.

Getting Operating System Updates

Microsoft Service Packs and Service Releases contain the latest improvements and system
fixes for Microsoft operating systems. Service Packs and Releases are created by Microsoft
for post-release support. You can get then from Microsoft's World Wide Web and FTP sites
free of charge.
CAUTION If Intergraph Computer Systems provides a Service Pack through the IBBS or with a product,
it has been certified against Intergraph Computer Systems hardware as described in the
announcement of its availability. If you obtain a Service Pack from any other source, be
aware that it may not be certified against your Intergraph hardware.
. file on the QFE diskette for instructions to update the
README TXT
. utility or InterSite Welcome (as described in Chapter 2) to create an
EXE