Starting Bios Setup - Intergraph InterServe 80 SL System Setup

54

Starting BIOS Setup

To start BIOS Setup:
1. Restart the system. An Intergraph Computer Systems logo displays.
2. Press
F
NOTE You can only start BIOS Setup during the boot sequence.
NOTE You can set a password to prevent unauthorized users fro m accessing BIOS Setup. See
"Features Screen" in this chapter.
While using BIOS Setup, remember these tips:
u
To move between screens in BIOS Setup, press the right and left arrow (
u
To move between options on a screen, press the up and down arrow ( / ) keys.
u
To change a BIOS setting, use one of the following methods:
Highlight the setting, and press
and down arrow keys to select a value, and then press
Highlight the setting, and use the plus or minus (+/-) keys to increase or decrease its
value.
u
To exit from a menu in BIOS Setup, press
u
To exit BIOS Setup, use the Save Changes and Exit option to exit and save your BIOS
settings.
BIOS Setup has six primary configuration screens listed across the top of the screen:
u
Info
u
Main
u
Advanced
u
Chipset
u
Features
u
Exit
Each of these screens is described in the remaining sections of this chapter.
2 to start BIOS Setup.
to display a list of possible values. Use the up
ENTER
ENTER
.
ESC
/ ) keys.
again to select it.