Advanced Screen; Plug & Play O/S; Reset Configuration Data; Pci/Pnp Configuration - Intergraph InterServe 80 SL System Setup
Rack mount
Hide thumbs
Also See for InterServe 80 SL:
- System setup (106 pages) ,
- System reference manual (94 pages) ,
- Manual (8 pages)
Table of Contents
Advertisement
Advanced Screen
Use the Advanced screen to configure system devices. Use the left and right arrow keys to
highlight Advanced on the BIOS Setup main menu. The Advanced screen displays as shown
in the following figure.
Plug & Play O/S
When set to Yes, this setting allows your system to work with a Plug and Play operating
system, such as Windows 95. The default setting is No.
NOTE
The setting should be No when using Windows 3.1 or Windows NT.
Reset Configuration Data
When set to Yes, this setting causes the system to reset Extended System Configuration Data
(ESCD) when you exit Setup. This allows the PnP BIOS to redetect your PCI and ISA PnP
devices, and reallocate resources to them. The default setting is No.
PCI/PnP Configuration
Use this setting to display a submenu with options for configuring legacy ISA devices.
59
Advertisement
Table of Contents
Need help?
Do you have a question about the InterServe 80 SL and is the answer not in the manual?
Questions and answers