Changing Virtual Memory Settings; Configuring The Symbios Scsi Adapter - Intergraph InterServe 80 SL System Setup

36
6. If necessary, click OK, and then click Yes.
7. Repeat steps 2 through 6 for each drive letter assignment that you want to change.
8. Click Partition, then click Exit. If necessary, restart the system to complete the drive
letter reassignments.

Changing Virtual Memory Settings

If you have more than one hard disk drive, you may need to change size and location of your
virtual memory page file. See Windows NT Help for more information.
Consider the following before changing page file settings:
u
The size of the page file. If your system is equipped with a large amount of RAM, Setup
might create a page file that is unnecessarily large.
u
Drive letter reassignments. If you reassigned your drive letters, you may find it necessary
to adjust your page file settings.
To change the size and location of the virtual memory page file:
1. From Start, click Settings, and then click Control Panel.
2. Double-click the System icon.
3. Click the Performance tab and then click Change.
4. Click a drive letter in the list, and then type new values in the Initial Size and Maximum
Size text boxes.
5. Click Set.
6. Repeat steps 4 and 5 for any additional drives in the list.
7. Click Close, then click OK. An alert box displays.
8. Do one of the following:
Click Yes to restart the system with the new settings.
Click No to continue with other tasks and use the new settings the next time you
restart the system.

Configuring the Symbios SCSI Adapter

If your InterServe 80 SL Rack Mount system is equipped with an optional Symbios SCSI
adapter, you may need to use the SCSI Configuration Utility to configure the operation of