System Power States; Automatic Shutdown Utility - Intergraph InterServe 80 SL System Setup

44
u
To power down during normal operation, do not use the Power button. Instead, double-
click the Automatic Shutdown Utility icon in the taskbar tray.
For details on using the Automatic Shutdown Utility, refer to the following sections in this
chapter.

System Power States

The advanced power management features of the InterServe 80 SL Rack Mount help you save
energy and prolong system life. These features also provide for future functionality, such as
remote system wake up. See the online System Introduction delivered with the system for
details.
NOTE Remember that the InterServe 80 SL Rack Mount is always powered on when it is connected
to AC power.
One of the power management features is the implementation of power states. The upper LED
on the front panel indicates the system's current power state, as shown in the following table.
LED
Green
Off
If the power cord is plugged in, but the LED is off, then the system has a power voltage
problem. Call the Intergraph Computer Systems Customer Response Center for assistance.

Automatic Shutdown Utility

The Automatic Shutdown Utility allows you to select among various shutdown options. This
utility provides additional options over the standard shutdown options available from the
operating system Start menu. To access Help for this utility, from the operating system Start
menu, click Programs, click Automatic Shutdown Utility, and then click Automatic Shutdown
Help.
Power State Description Explanation
Working On
Mechanical Off
Off
System is fully usable; power conservation is on a
per-device basis.
No power consumption. The system is
disconnected from AC power.
To return the system to the Working state, you must
reconnect the power cord and perform a full system
shutdown and restart using the Automatic Shutdown
Utility.