Installing Option Pack Software; What's Next - Intergraph InterServe 80 SL System Setup

NOTE You may not have to create backup diskettes for all system software. If Version Manager
does not list drivers or other system software products, then they are available on the
operating system software CD, or on backup media delivered with the system.
If the system requires Quick-Fix Engineering (QFE) update software, it is included in the
system software available for backup diskette creation. QFE update software contains fixes
for operating system problems or limitations, and is only shipped with the system if it is
needed. If QFE update software is shipped with the system, you should create a QFE backup
diskette for use if you have to reinstall the operating system.
See Version Manager Help for information on creating system software backup diskettes.
Visit the Intergraph Computer Systems site on the World Wide Web and vendor bulletin
boards for new and updated drivers.

Installing Option Pack Software

If you choose to install software from the Windows NT Option Pack on a system running
Windows NT Service Pack 4 or greater, the following message displays during the Option
Pack installation:
Setup has detected that Windows NT SP4 or greater is installed on
your machine.
to proceed?
If you see this message, do the following:
1. Complete the installation of the Windows NT Option Pack.
2. Reinstall Windows NT Service Pack 4 or greater.

What's Next?

See Chapter 3, "Configuring the System," to configure the system for use. See Chapter 4,
"Operating Notes," for related details.
We haven't tested this product on SP4.
25
Do you wish