Ps/2 Mouse; Legacy Usb Support; Integrated Ports - Intergraph InterServe 80 SL System Setup

60
PCI/PnP ISA UMB Region Exclusion
This setting reserves specific upper memory blocks for use by ISA devices. Press the up or
down arrow keys to highlight the memory block, and then use the plus or minus keys to
reserve it.
PCI/PnP IRQ Exclusion
This setting reserves specific IRQs for use by ISA devices. Press the up or down arrow keys
to select the IRQ, and then use the plus or minus keys to reserve it.

PS/2 Mouse

When disabled, this setting prevents the PS/2 mouse from functioning, and frees up IRQ12.
Selecting Auto Detect allows the operating system to determine whether to enable or disable
the mouse. The default setting is Auto Detect.

Legacy USB Support

Use this setting to allow USB devices to function in alternative operating systems. Select
Enabled when using DOS and Windows 95 operating systems; select Disabled when using
Windows NT, OS/2 and Unix operating systems. The default setting is Disabled.
NOTE Your USB device must still have and load its own drivers for a particular operating system.

Integrated Ports

Use this setting to display additional setup menus for configuring peripheral devices. For
example, you may want to configure a serial port for a specific modem. Press
display the Integrated Ports submenu. The submenu provides the following options:
Serial Port A/B
This setting configures the operation of the serial ports. Select Disable (to disable the selected
port), Enable (to allow user configuration of the selected port), Auto (to enable BIOS or OS
configuration) or OS Controlled (to allow the operating system to manage the port
configuration). The default setting is Auto.
to
ENTER