Ac Interrupt State; Chipset Screen; Graphics Aperture; Dram Type - Intergraph InterServe 80 SL System Setup

Rack mount

Hide thumbs Also See for InterServe 80 SL:

Table of Contents

AC Interrupt State

This setting controls how the system responds when power is restored after a loss of AC

power. When set to Use last state, the system returns to the state it was in before the power

interruption. When set to Stay off, the system remains off. The default setting is Stay off.

The Chipset screen allows you to program the Intel 440BX AGP chipset features. Use the left

and right arrow keys to highlight Chipset on the BIOS Setup main menu. The Chipset Setup

screen displays as shown in the following figure.

Select the size of the Graphics Aperture for the AGP video device. The aperture is a portion

of the PCI memory address range dedicated for graphics memory address space.

The DRAM type can be set to Non-Parity, Parity, or ECC. Selecting ECC will enable the

system to detect and correct parity errors. ECC memory must be installed in the system to use

the ECC setting. The BIOS default setting is Non-Parity.

NOTE

Intergraph ships InterServe 80 SL system s with ECC memory installed, and with the DRAM

Type BIOS parameter set to ECC. If you flash the BIOS or restore the default settings, you

must manually change this parameter back to ECC.

Table of Contents

Do you have a question about the InterServe 80 SL and is the answer not in the manual?