Exit Screen; Setting The Cpu Speed - Intergraph InterServe 80 SL System Setup

68

Exit Screen

When you finish configuring the BIOS, use the left and right arrow keys to highlight the Exit
option on the BIOS Setup main menu. The Exit screen displays as shown in the following
figure.
Choose one of the following exit options. To move between the Exit options, use the up and
down arrow keys:
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Save Changes
To save your changes and restart the computer, choose Exit Saving Changes.

Setting the CPU Speed

This section provides instructions for setting the CPU speed. Use these instructions after
installing a new CPU or to change the current CPU speed. See the System Reference for the
location of jumper W12.
Saves the changes you have made, exits the BIOS, and restarts
the system to make these changes take effect
Leaves the previous BIOS settings intact, exits the BIOS, and
restarts the system
Returns the BIOS parameters to their original default settings
Discards any changes you have made, but does not exit the BIOS
Saves any changes you have made, but does not exit the BIOS