Cleaning The System; Additional User Information - Intergraph InterServe 80 SL System Setup

52

Cleaning the System

CAUTION Turn off power to the system before cleaning the exterior surfaces, the mouse, or the
keyboard. Do not clean the CD-ROM drive.
Follow these guidelines for cleaning the system:
Item
Mouse
Keyboard
Exterior Surfaces

Additional User Information

User information for the following hardware is provided in separate documents, delivered with
the system.
u
RAID or SCSI controller
u
Networking card
u
InterSite Server Monitor card
u
Uninterruptible Power Supply
u
Concentrator
u
Keyboard
u
Pointing or tracking device
Additional technical information about the system is included in the System Reference
document. If the system came with an Intergraph rack, refer to the documentation delivered
with the rack and other rack-mounting equipment for information and safety precautions
related to using the system in a rack.
How To Clean
On the bottom of the mouse, a retaining ring holds the tracking ball in
place. Remove the retaining ring and turn the mouse over; the tracking ball
will fall out. Blow gently into the opening. Clean the tracking ball and
rollers with a cotton swab and alcohol. Replace the tracking ball and the
retaining ring.
Dust with a dry cloth. Aerosol cleaners are commercially available to
remove the dust between the keys of the keyboard. Never allow moisture
on the keyboard or the surface beneath the keys.
Clean the exterior surfaces of the base unit and the monitor screen with a
mild cleaning detergent and a clean cloth.