Features Screen; Quickboot; Quietboot; Dmi Event Logging - Intergraph InterServe 80 SL System Setup

Rack mount

Hide thumbs Also See for InterServe 80 SL:

Table of Contents

Features Screen

The Features Screen allows you to configure the boot configuration, power management

functions and the security of the system. Use the left and right arrow keys to highlight

Features on the BIOS Setup main menu. The Features screen displays as shown in the

following figure.

This setting allows the system to skip certain tests while booting, and decrease the time needed

to boot up the system. The default setting is Enabled.

When disabled, this setting displays the system diagnostics screen during boot up. When

enabled, the system logo screen displays in place of the system diagnostics screen. The

default setting is Enabled.

Use this setting for additional setup menus to control the Desktop Management Interface

(DMI) Event Logging functions of the system. This setting allows you to view and modify

DMI Event logs. To enable the DMI Event Logging setting, highlight it and press

submenu displays as shown in the following figure.

. A

ENTER

Table of Contents

Do you have a question about the InterServe 80 SL and is the answer not in the manual?