Saving A Program; Using The Step Sequencer; Playback And Recording On The Step Sequencer; Step Recording - Korg opsix SE Quick Start Manual

Tip: For details on each parameter and for more information on the
effect parameters, see the Owner's Manual (PDF).

Saving a program

Save any programs to the opsix SE that you have edited.
Any edits you make will be lost if you turn off the power of the opsix SE or
select a different program before saving the data.
1.
Press the WRITE button [15].
The opsix SE will enter program save standby mode, and the YES and
NO buttons will blink.
2.
Change the program name as necessary.
PROGRAM knob [5]: Changes the character at the cursor position.
SHIFT button [16]: Changes the type of character to input.
PAGE < and > buttons [7]: Moves the cursor. Hold down the SHIFT
button while pressing the PAGE < button to delete the character at the
cursor position. Hold down the SHIFT button while pressing the PAGE
> button to insert a blank space at the cursor position.
DATA ENTRY A–F knob [12]: Turning this knob left or right is the
same as pressing the PAGE < and > buttons in succession.
3.
Press the YES button to confirm the program name.
4.
Turn the PROGRAM knob to select the program location to which will
save your edited sound.
Select a different program if you wish to keep the original program.
Tip: Press the NO button to cancel.
5.
Press the YES button to save the program.
The program will be saved, and the message "Write Completed" will be
shown in the display.
Never turn off the power while a program is being saved. Doing so
may corrupt the internal data.

Using the step sequencer

The opsix SE has a polyphonic sequencer that features up to 16 steps.
Sequence data for the step sequencer can be saved in each program. In
addition to note data, you can also record and play back motion sequences
(these are changes made to the sound using the knobs or sliders on the opsix
SE).

Playback and recording on the step sequencer

Here we will play back the sequence data recorded for each program.
1.
Press the PLAY button [22].
The sequence data recorded for the currently selected program will play.
2.
Press the REC button when you want to record what you play on the
keyboard.
The REC button [23] will light up, and all notes that you play afterwards
will be recorded as sequence data. Press the REC button again to finish
recording.
3.
To stop sequence data playback, press the PLAY button again.
NOTE: Any data you record will be lost if you turn off the power on the
opsix SE or select a different program before saving the data. →
"Saving a program"

Step recording

1.
Press the SEQ STEPS/FAVORITE MODE button [21] to select SEQ
STEPS.
2.
Select a program, and then press the REC button.
The STEP 1 button will blink.
3.
Use the STEP 1–16 buttons [26] to select the steps to input.
The STEP buttons that you select will blink.
4.
Press one or more keys on the keyboard at the same time to record one
or more notes at the current step.
Press one of the STEP 1–16 buttons while holding down a key to record
a tie. The tie will connect the note to the step you pressed.
5.
When the set number of steps have finished recording, step recording
will automatically end (the REC button will go dark).
Press the REC button during recording to stop recording midway.
6.
After you have finished recording, save the program.
If you select another program before saving your edited program, the
sequence data in the newly selected program will be recalled, and the
sequence data you recorded will be lost.
Saving a program will overwrite the sequence data at that program
location.

Other functions

Restoring the opsix SE to factory-set default
settings
To restore the opsix SE to its factory default state, turn on the power while
holding down the SHIFT and WRITE/RECALL buttons. See the Owner's
Manual (PDF) for details.
Never turn off the power while data is being loaded. Doing so may
corrupt the internal data.
Keyboard: 61 keys, Natural Touch keyboard (velocity and release-velocity
sensitive, with aftertouch)
Maximum Polyphony: 80 voices (the maximum number of voices depends
on the settings)
Sound generating system: Altered FM sound generator
Number of programs: 500
Inputs/outputs: Headphone (6.3 mm stereo phone jack), OUTPUT L/
MONO and R (impedance-balanced 6.3 mm TRS phone jacks), DAMPER
(6.3 mm phone jack, half-damper not supported), MIDI IN and OUT
connectors, USB B port
Power supply: AC adapter (DC12V,
Power consumption: 5 W
Dimensions (W × D × H): 1014 × 344 × 108 mm/39.92" × 13.54" × 4.25"
Weight: 8.6 kg/18.96 lbs.
Included items: AC adapter, Quick Start Guide
Accessories (sold separately): DS-1H damper pedal, PS-1 pedal switch, PS-3
pedal switch
* Specifications and appearance are subject to change without notice for
improvement.
En-7

Specifications

)