Edit: Velocity; Event Edit - Korg microARRANGER Owner's Manual

PAGE 3 - EDIT: VELOCITY
In this page you can change the velocity (dynamics)
value of notes in the selected track.
After setting the various parameters, press ENTER to
execute. The "Are you sure?" message will appear.
Press ENTER to confirm, EXIT to abort.
E/CV (Style Element/Chord Variation)
(Non editable) These read‐only parameters show which
Style Element and Chord Variation are currently
selected for editing. See the Main page "E (Style Ele‐
ment)" and "CV (Chord Variation)" parameters on
page 55 for information on selecting a different Style
Element and Chord Variation.
Trk (Track)
Use this parameter to select a track.
All All tracks selected. The velocity for all
notes of the whole selected Chord Varia‐
tion will be changed.
Drum...Acc5Selected track.
Value
Velocity change value (±127).
S / E (Start/End)
Use these parameters to set the starting (S) and ending
(E) points of the range to be modified.
If a Chord Variation is four measures long, and you
want to select it all, the Start will be positioned at
1.01.000, and the End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the
keyboard range to be modified. If you select the same
note as the Bottom and Top parameters, you can select
a single percussive instrument in a Drum or Percussion
track.
Note: These parameters are available only when a Drum or
Percussion track is selected.
PAGE 4 - EVENT EDIT
The Event Edit page allows you to edit each event in a
single track. See "Event Edit procedure" on page 65 for
more information on the event editing procedure.
Event Type First value
Trk (Track)
Track in edit. To select a different track, press one of the
A VOLUME/VALUE buttons to open the Go To Track
window.
Use the TEMPO/VALUE controls to select a track, and
press ENTER to confirm, or EXIT to abort.
E/CV (Style Element/Chord Variation)
Selected Style Element and Chord Variation. This
parameter can't be edited. To select a different Style
Element and Chord Variation, press EXIT to go back to
the Main page of the Style Record mode (see "Main
page" on page 55).
Position
Position of the event shown in the display, expressed in
the form 'aaa.bb.ccc':
• 'aaa' is the measure
• 'bb' is the beat
• 'ccc' is the tick (each quarter beat = 384 ticks)
You can edit this parameter to move the event to a dif‐
ferent position.
Ev (Event)
Type and values of the event shown in the display.
Depending on the selected event, the value may
change. This parameter also shows the (non‐editable)
"End Loop" marking, when the end of a track is
reached.
Event First value
Note Note name
Ctrl Control Change number
Bend Bending value
To change the event type, use the C VOLUME/VALUE
buttons to select the Event line, then use the same but‐
tons or the TEMPO/VALUE controls to select a differ‐
ent event type.
To select and edit the event's value, use the F‐3 and F‐4
function keys, and use the G/VOLUME/VALUE but‐
tons or the TEMPO/VALUE controls.
Style Record mode 63
Page 3 - Edit: Velocity
Second value
Second value
Velocity
Control Change value
–