Edit: Velocity; Event Edit - Korg PA 80 User Manual

10-12 Style Record mode
Page 3 - Edit: Velocity
PAGE 3 - EDIT: VELOCITY
In this page you can change the velocity (dynamics) value of
notes in the selected track.
Edit:Velocity
EV1 CV:CV1
S001-01-000 E001-01-192
Bottom:G-1
After setting the various parameters, press ENTER to execute.
The "Are you sure?" message will appear. Press ENTER to
confirm, EXIT to abort.
E/CV (Style Element/Chord Variation)
(Non editable) These read-only parameters show which Style
Element and Chord Variation are currently selected for edit-
ing. See the Main page "E (Style Element)" and "CV (Chord
Variation)" parameters on page 10-4 for information on
selecting a different Style Element and Chord Variation.
Trk (Track)
Use this parameter to select a track.
All All tracks selected. The velocity for all notes of
the whole selected Chord Variation will be
changed.
Drum...Acc5 Selected track.
Value
Velocity change value (±127).
S / E (Start/End)
Use these parameters to set the starting (S) and ending (E)
points of the range to be modified.
If a Chord Variation is four measures long, and you want to
select it all, the Start will be positioned at 1.01.000, and the
End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the key-
board range to be modified. If you select the same note as the
Bottom and Top parameters, you can select a single percus-
sive instrument in a Drum or Percussion track.
Note: These parameters are available only when a Drum or
Percussion track is selected.
PAGE 4 - EVENT EDIT
The Event Edit page allows you to edit each event in a single
track. See "Event Edit procedure" on page 10-13 for more
information on the event editing procedure.

Event Edit

Trk: DRUM
Position: 001.01.000
Ev: Note
Lenght:000.00.000
Event Type
Trk:DRUM
Value:+000
Top:C8
E:V1 CV:CV1
|
F#2 72
|
First value Second value
Trk (Track)
Track in edit. To select a different track, press one of the A
VOLUME/VALUE buttons to open the Go To Track window.
Go to Track: DRUM
Enter=Ok
Use the TEMPO/VALUE controls to select a track, and press
ENTER to confirm, or EXIT to abort.
E/CV (Style Element/Chord Variation)
Selected Style Element and Chord Variation. This parameter
can't be edited. To select a different Style Element and Chord
Variation, press EXIT to go back to the Main page of the Style
Record mode (see "Main page" on page 10-4).
Position
Position of the event shown in the display, expressed in the
form 'aaa.bb.ccc':
• 'aaa' is the measure
• 'bb' is the beat
• 'ccc' is the tick (each quarter beat = 384 ticks)
You can edit this parameter to move the event to a different
position.
Ev (Event)
Type and values of the event shown in the display. Depending
on the selected event, the value may change. This parameter
also shows the (non-editable) "End Loop" marking, when the
end of a track is reached.
Event First value
Note Note name
Ctrl Control Change number
Bend Bending value
To change the event type, use the C VOLUME/VALUE but-
tons to select the Event line, then use the same buttons or the
TEMPO/VALUE controls to select a different event type.
To select and edit the event's value, use the F3 and F4 func-
tion keys, and use the G/VOLUME/VALUE buttons or the
TEMPO/VALUE controls.
Length
Length of the selected Note event. The value format is the
same as the Position value.
Note: If you change a length of "000.00.000" to a different
value, you can't go back to the original value. This rather
uncommon zero-length value may be found in some drum or
percussion tracks.
Transport, navigation and editing controls
E/F and H VOLUME/VALUE buttons
These buttons are the "Scroll to previous event" (E/F) and
"Scroll to next event" (H) controls. They corresponds to the
scrolling arrows shown on the screen.
G VOLUME/VALUE buttons
Use these buttons to select the corresponding parameter
value area.
Exit=Cancel
Second value
Velocity
Control Change value
–