Mixer: Volume; Mixer: Pan; Mixer: Fx Block; Page 2 ‐ Mixer: Pan - Korg microARRANGER Owner's Manual

A–H
Each pair of VOLUME/VALUE buttons select a differ‐
ent track, parameter of command, depending on the
edit page.
Track status icons
A series of icons near each track show the track's status.
Selected track or parameter. When this
symbol appears, you can execute any
available operation on the selected item.
Track in play or already recorded.
(no icon) The track is in mute, or does not contain
data.
PAGE 1 - MIXER: VOLUME
Here you can adjust the volume for each of the 16
sequencer tracks. Press both VOLUME/VALUE button
to mute/unmute the corresponding track.
A muted track remains muted even when selecting a
different Song.
Use the TRACK SELECT button to switch between
Song tracks 1–8, Song tracks 9–16, and back again.
PAGE 2 - MIXER: PAN
Here you can adjust the pan for each Song track.
Use the TRACK SELECT button to switch between
Song tracks 1–8, Song tracks 9–16, and back again.
Pan
‐64 Hard Left.
+00 Center.
+63 Hard Right.
Off The direct (uneffected) signal does not go
to the outputs; only the FX signal is heard
for this track.
PAGE 3 - MIXER: FX BLOCK
This page lets you select a pair of effect processor (AB
or CD) for each of the Song track.
Use the TRACK SELECT button to switch between
Song tracks 1–8, Song tracks 9–16, and back again.
Song operating mode
Page 1 - Mixer: Volume
95