Save; Page 2 ‐ Save - Korg microARRANGER Owner's Manual

8. Press F‐3 (OPEN) to open the selected bank. A list
of User items appears.
9. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the desired item to the
first line of the display.
10. Press F‐2 (LOAD) to confirm the file selection. The
internal memory file list appears. If you are load‐
ing a single file or bank of Styles, Programs or Per‐
formances, you are prompted to choose a
destination in memory. For example, when load‐
ing a single Style, after selecting the Load com‐
mand, a page similar to the following appears in
the display:
In the page above, the previously selected Style
will be loaded into the location U1:1 (USER1 but‐
ton, Style 01) in memory. The existing Style in
memory will be deleted and overwritten.
11. Scroll the available locations in memory, using the
E–H (Scroll) buttons (or the TEMPO/VALUE con‐
trols). When the target location is selected (i.e., it is
in the first line of the display), press F‐2 (LOAD) to
load the file.
Locations marked with a row of underscores ("_ _
_") are empty locations.
12. Once the target location is selected, press F‐2
(LOAD) to load the file. The "Are you sure?" mes‐
sage will appear. Press ENTER to confirm, or EXIT
to abort.
Warning: After confirming, the item you are overwrit‐
ing in memory will be deleted.
When the operation is completed (the "Wait" indi‐
cator disappears), the source page comes back in
the display, and you may perform further loading
operations.
Card Edit environment
PAGE 2 - SAVE
In this page, you can save User data from the internal
memory to a card. You can save files, banks, or all the
User files of the internal memory.
Press SD CARD and use the MENU or PAGE buttons
to reach this page.
Here are the various types of files contained in mem‐
ory:
The file/folder
...contains...
type...
ALL All the User data in mem-
ory
Style The USER 01–03 Styles
Program The USER Programs and
Drum Kits
Perform (Perfor- The Performances
mances)
.GBL file The Global. All parameters
marked with
the Style Play, Song Play,
Song and Global chapters
are saved in the Global.
Saving the whole memory content
You can save the whole content of the memory with a
single operation.
1. Insert the target card into the card slot.
2. The whole content ("All") of the internal memory
is already selected. Press F‐2 (SAVE) to confirm the
selection.
3. The content of the target card appears.
At this point, you can:
• Create a new ".SET" folder (see "Creating a new
".SET" folder" on page 138).
• Save onto an existing ".SET" folder.
4. If you are saving into an existing folder, move the
desired ".SET" folder to the first line of the display,
using the E–H (Scroll) buttons (or the TEMPO/
VALUE controls).
135
Page 2 - Save
...and will create on
the card...
A .SET folder
A STYLE folder inside a
.SET folder
A PROGRAM folder inside
a .SET folder
A PERFORM folder inside
a .SET folder
A GLOBAL folder inside a
within .SET folder