Menu - Korg microARRANGER Owner's Manual

This lets you play a list of Songs without multiple selec‐
tions.
Note: The Jukebox file can be assigned to the Sequencer
1 only.
Note: To create a Jukebox file, go to the Jukebox page (see
page 79).
Warning: Should you delete a Song included into the Juke‐
box list currently in play, the sequencer will stop, and the
"No Song" message will appear. At this point, press
SHIFT+>> (Seq1) to go to the next Song, and press PLAY/
STOP again.
Transport controls
When you select a Jukebox file, Sequencer 1 transport
controls are slightly different than with single Songs.
<< and >> Pressed alone, these buttons are the
Rewind and Fast Forward commands.
Keep the SHIFT button pressed,
and press these buttons to scroll to the
previous or next Song in the Jukebox list.
PAUSE Pauses the Song at the current position.
Press PAUSE or PLAY/STOP to start the
Song playing again.
PLAY/STOP Starts or stops the current Song. When
you stop the Song, the sequencer goes
back to measure 1 of the current Song.
If the Jukebox page is open, you can start
from the Song at the first line of the dis‐
play. See "Page 9 ‐ Jukebox" on page 79.

MENU

From any page, press MENU to open the Song Play
edit menu. This menu gives access to the various Song
Play edit sections.
When in the menu, select a section using the VOLUME/
VALUE buttons, press PAGE+ to select a page, or press
EXIT to exit the menu.
When in an edit page, press EXIT to go back to the
Song Play mode main page.
Song Play operating mode
Each item of this menu corresponds to an edit section.
Each edit section groups many edit pages.
EDIT PAGE STRUCTURE
Select an edit section from the Menu, and/or use the
PAGE buttons to reach the desired page.
Press EXIT to go back to the main page of the Song Play
mode.
All edit pages share the same structure.
Song Play icon
Page header
Song Play icon
When on, this icon indicates that the instrument is in
Song Play mode.
Page header
The header shows the name of the current edit page.
Usually, the header is divided into a first word, identi‐
fying the section name (e.g., "Mixer:FX Send" is a
"Mixer" section page), and a second word, referring to
the page name (e.g. "FX Send").
Section name
Selected Sequencer
These indicators show if the currently selected
sequencer is Seq1 or Seq2. Go to the Main page and use
the A and B VOLUME/VALUE buttons to select a
sequencer.
Page
This area shows the current page number.
A–H
Each pair of VOLUME/VALUE buttons select a differ‐
ent parameter of command, depending on the edit
page.
Menu
Selected Sequencer
Page number
Page name
75