See The Song Tracks - Korg microARRANGER Owner's Manual

MAIN PAGE
Press SONG PLAY to access this page from another
operating mode.
Note: When switching from Style Play to Song Play, the
Song Setup is automatically selected, and various track
parameters may change.
Press EXIT/NO to access this page from the Menu or
any of the Song Play edit pages.
To see the Song's tracks, use the TRACK SELECT but‐
ton to switch from the main page (showing the Real‐
time tracks), to the other tracks. Pressed a first time,
you will see tracks 1–8 (enlightened TRACK SELECT
LED); a second press will show tracks 9–16 (flashing
TRACK SELECT LED); pressed again, you will go back
to the Realtime tracks (TRACK SELECT LED switched
off).
Song Play icon
Page header
Song select commands
Song Play icon
When on, this icon shows that the instrument is in Song
Play mode.
Page header
This line shows the currently selected sequencer, and
the assigned Song ("S1:Song Name" or "S2:Song
Name").
When no Song is assigned to the current sequencer, this
line shows only the selected sequencer number ("S1:"
or "S2:", depending on the selected sequencer).
When no sequencer or Song is selected, only the "No
Song" text appears.
Press either A (S1:) or B (S1:) to switch between
Sequencer 1 and Sequencer 2. When one of the
sequencers is selected, the sequencer number is also
shown at the right of the metronome Tempo.
When a Jukebox file is in play, its name appears on the
page header.
Selected Sequencer
These indicators show if the currently selected
sequencer is Seq1 or Seq2. Use the A and B VOLUME/
VALUE buttons to select a sequencer.
Selected Sequencer
Measure number
Realtime (Keyboard) tracks
Song Play operating mode
Bar number
This counter shows the current bar number position of
the selected Song.
A (S1:SongName)
Pressed a first time (with a Song already selected) this
button pair selects Sequencer 1. Pressed a second time
(or with no Song selected), it opens the Song Selection
page (see "Song Select page" on page 74), allowing for
selection of a single Song or a Jukebox file for
Sequencer 1.
If you select another Song, while a Song is in play
within the same Sequencer, the new Song will start
playing.
While this parameter is selected, you can select a Song
by composing its progressive number (see "Selecting a
Song composing its progressive number" on page 70).
B (S2:SongName)
Pressed a first time (with a Song already selected) this
button pair selects Sequencer 2. Pressed a second time
(or with no Song selected), it opens the Song Selection
page (see "Song Select page" on page 74), allowing for
selection of a single Song for Sequencer 2.
If you select another Song, while a Song is in play
within the same Sequencer, the new Song will start
playing.
While this parameter is selected, you can select a Song
by composing its progressive number (see "Selecting a
Song composing its progressive number" on page 70).
C (Lyrics)
Open the Lyrics page (see "The Lyrics page" on
page 74). Lyrics will be shown only if included into the
selected Song, and compatible with a standard format
that microARRANGER can recognize.
E (Upper 1 Program), F (Upper 2 Program), G (Upper 3
Program), H (Lower)
Name of the Programs assigned to the Realtime (Key‐
board) tracks. Use these buttons to select, mute/unmute
or change the volume of the corresponding tracks.
TRACKS 1–8 PAGE
To see and edit tracks 1–8, press TRACK SELECT from
the main page. The TRACK SELECT LED turns on.
Press the TRACK SELECT button twice, to go back to
the main page.
A–H (Tracks 1–8 Programs)
Name of the Programs assigned to tracks 1–8. Use
these buttons to select, mute/unmute or change the vol‐
ume of the corresponding tracks.
73
Main page