Korg microARRANGER Owner's Manual page 139

using the E–H (Scroll) buttons (or the TEMPO/
VALUE controls).
9. Press F‐2 (SAVE) to confirm. A list of banks on the
target card appears. Only banks of the selected
type are shown.
10. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the target bank to the
first line of the display.
11. Once the target bank is selected, press F‐2 (SAVE)
to save the files. The "Are you sure?" message will
appear. Press ENTER to confirm, or EXIT to abort.
Warning: If you confirm, any data in the target bank
will be deleted.
When the operation is completed (the "Wait" indi‐
cator disappears), the source page comes back in
the display, and you may perform further saving
operations.
Saving a single item
You can save a single User item with a single operation.
1. Insert the target card into the card slot.
2. The whole content ("All") of the internal memory
is already selected. Press F‐3 (OPEN) to open the
"All" folder. A list of User data types appear (each
type is a separate folder).
3. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the data type you are
looking for to the first line of the display.
4. Once the data type is selected, press F‐3 (OPEN) to
open the folder and gain access to the separate
banks.
5. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the bank containing the
file to save to the first line of the display.
Card Edit environment
6. Once you have selected the bank, press F‐3
(OPEN) to gain access to the single files.
7. Once you have selected the file that you want to
save, press F‐2 (SAVE) to confirm the selection.
8. The content of the target card appears in the display.
At this point, you can:
• Create a new ".SET" folder (see "Creating a new
".SET" folder" on page 138).
• Save onto an existing ".SET" folder (saved data
is merged with the existing data on the card).
9. If you are saving into an existing folder, move the
desired ".SET" folder to the first line of the display,
using the E–H (Scroll) buttons (or the TEMPO/
VALUE controls).
10. Press F‐2 (SAVE) to confirm. A list of files on the
target device appears. Only files of the selected
type are shown.
Locations marked with a row of underscores
("___") are empty locations.
11. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the target location to the
first line of the display.
12. Once the target location is selected, press F‐2
(SAVE) to save the file. The "Are you sure?" mes‐
sage will appear. Press ENTER to confirm, or EXIT
to abort.
Warning: If you confirm, any data at the target location
will be deleted.
When the operation is completed (the "Wait" indi‐
cator disappears), the source page comes back in
the display, and you may perform further saving
operations.
137
Page 2 - Save