Edit: Quantize; Edit: Transpose; Edit: Velocity; Page 17 ‐ Edit: Quantize - Korg microARRANGER Owner's Manual

100 Song operating mode
Page 17 - Edit: Quantize
PAGE 17 - EDIT: QUANTIZE
The quantize function corrects any rhythm error after
recording.
After setting the various parameters, press ENTER to
execute. The "Are you sure?" message will appear.
Press ENTER to confirm, EXIT to abort.
Trk (Track)
Use this parameter to select a track.
All All tracks selected.
1...16 Selected track.
Resol (Resolution)
This parameter sets the quantization after recording.
For example, when you select 1/8a, all notes are moved
to the nearest 1/8 division. When you select 1/4, all
notes are moved to the nearest 1/4 division.
No quanti-
zation
1/8
1/4
(1/32)... (1/4)
Grid resolution, in musical values. An "a"
after the value means no swing. A "b...f"
after the value means swing‐quantization.
S / E (Start/End)
Use these parameters to set the starting (S) and ending
(E) points of the range to quantize.
If you wish to select a four‐measure sequence starting
at the beginning of the Song, the Start will be posi‐
tioned at 1.01.000, and the End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the
keyboard range to quantize. If you select the same note
as the Bottom and Top parameters, you can select a sin‐
gle percussive instrument in a Drum track.
Note: These parameters are available only when a Drum
track is selected.
PAGE 18 - EDIT: TRANSPOSE
Here you can transpose the Song, a track or a part of a
track.
After setting the various parameters, press ENTER to
execute. The "Are you sure?" message will appear.
Press ENTER to confirm, EXIT to abort.
Trk (Track)
Use this parameter to select a track.
All All tracks selected (apart for Drum tracks).
1...16 Selected track.
Value
Value of the transpose (in semitones).
S / E (Start/End)
Use these parameters to set the starting (S) and ending
(E) points of the range to transpose.
If you wish to select a four‐measure sequence starting
at the beginning of the Song, the Start will be posi‐
tioned at 1.01.000, and the End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the
keyboard range to transpose. If you select the same
note as the Bottom and Top parameters, you can select
a single percussive instrument in a Drum track.
PAGE 19 - EDIT: VELOCITY
Here you can change the Velocity value for the notes.
After setting the various parameters, press ENTER to
execute. The "Are you sure?" message will appear.
Press ENTER to confirm, EXIT to abort.
Trk (Track)
Use this parameter to select a track.
All All tracks selected.
1...16 Selected track.
Value
Velocity change value.