Mod./P.shift; Mod./P.shift - Korg microARRANGER Owner's Manual

MOD./P.SHIFT

Other modulation and pitch shift effects

032: Tremolo
(Stereo Tremolo)
This effect modulates the volume level of the input sig‐
nal. The effect is stereo, and offsetting the LFO of the
left and right phases from each other produces a trem‐
olo effect between left and right.
Stereo In - Stereo Out
Left
Right
LFO: Tri/Sin/Vintage/Up/Down LFO Shape
LFO Waveform
Selects LFO Waveform
a
LFO Shape
Determines how much the LFO waveform is changed
LFO Phase [degree]
b
Sets the LFO phase difference between the left and right
LFO Frequency [Hz]
Sets the LFO speed
Src
c
Selects the modulation source of LFO speed
Amt
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using the
tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base Note
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Depth
Sets the depth of LFO modulation
Src
e
Selects the modulation source of the depth of modulation
Amt
Sets the modulation amount of the depth of modulation
Wet/Dry
Table , "Sets the balance between the effect and dry sounds," on page 175
Src
f
Table , "Selects the modulation source of the effect balance," on page 175
Amt
Table , "Sets the modulation amount of the effect bal-
ance," on page 175
a:LFO Waveform
This parameter selects the LFO waveform. Vintage wave
simulates the characteristics of the tremolo created on a gui-
tar amplifier. Combining this effect with the Amp Simulation
will make a realistic, vintage tremolo amplifier sound.
Triangle Sine
Wet / Dry
Tremolo
Tremolo
Wet / Dry
LFO Phase
Triangle, Sine, Vintage, Up, Down
–100...+100
Fx:020
–180...+180
0.02...20.00Hz
Fx:009,
Off...Tempo
–20.00...+20.00Hz
Off, On
Fx:009,
MIDI, 40...240
Fx:009
Fx:009
x1...x16
Fx:009
0...100
Off...Tempo
–100...+100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Tremolo - LFO Waveform
Vintage Up Down
b: LFO Phase [degree]
This parameter determines the difference between the left
and right LFO phases. A higher value will simulate the auto-
pan effect in which the sound is panned between left and
right.
033: EnvelTremol
(Stereo Envelope Tremolo)
This effect uses the input signal level to modulate a ste‐
reo tremolo. You can simulate a tremolo effect that
becomes deeper as it fades out while the level gets
lower.
Stereo In - Stereo Out
Left
Right
LFO: Tri/Sin/Vintage
+
Envelope

Envelope Sens (Envelope Sensitivity)
Sets the envelope sensitivity of the input signal
a

Envelope Shape
Sets the envelope curve shape of the input signal
LFO Waveform
Selects LFO Waveform
b
LFO Shape
Determines how much the LFO waveform is changed
LFO Phase [degree]
c
Sets the LFO phase difference between the left and right
LFO Frequency [Hz]
Sets the LFO speed
d
Envelope Amount [Hz]
Sets the changes of the LFO speed according to the input signal level
Depth
Sets the depth of LFO modulation
e
Envelope Amount
Sets the changes of the modulation depth according to the input signal level
Wet/Dry
Table , "Sets the balance between the effect and dry sounds," on page 175
Src
f
Table , "Selects the modulation source of the effect balance," on page 175
Amt
Table , "Sets the modulation amount of the effect bal-
ance," on page 175
d: LFO Frequency [Hz], d: Envelope Amount [Hz], 
e: Depth, e: Envelope Amount
These parameters set the modulation via an envelope (input
signal level).
The "LFO speed" is obtained by adding the "LFO Frequency"
value to the "Envelope Amount" value multiplied by the input
signal. The LFO modulation depth is obtained by adding the
Depth value to the "Envelope Amount" value multiplied by the
input signal level.
• The following example indicates that the "Depth"
is 0 with an LFO Frequency of 1.0Hz and the maxi‐
mum input, and that the "Depth" is 100 with a Fre‐
quency of 8.0Hz with zero input.
"LFO Frequency [Hz]"=8.0, "Envelope Amount [Hz]"=–7.0
Effects

Mod./P.Shift


Tremolo
Tremolo
LFO Phase
LFO Shape
Envelope Shape
Envelope Sens
Triangle, Sine, Vintage
0.02...20.00Hz
–20.00...+20.00Hz
Dry, 1:99...99:1, Wet
195
Wet / Dry
Wet / Dry
0...100
–100...+100
–100...+100
Fx:020
–180...+180
Fx:032


0...100

–100...+100

Off...Tempo
–100...+100