Copy; Page 3 ‐ Copy - Korg microARRANGER Owner's Manual

138 Card Edit environment
Page 3 - Copy
Creating a new ".SET" folder
When saving data (Save operations), you can save onto
existing folders, or you can create a new ".SET" folder.
Here is how to do it.
1. When the file list of the target card is in the dis‐
play, use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the "NEW_NAME.SET"
item to the first line of the display.
Note: A "NEW_NAME.SET" item is always the first
item in any directory.
2. When the "NEW_NAME.SET" item is selected,
press one of the A VOLUME/VALUE buttons. You
are prompted to assign a name to the new folder:
3. Move the cursor using the DOWN/‐ and UP/+ but‐
tons. Select a character using the DIAL. Insert a
character at the cursor position by pressing the
INSERT button. Delete a character at the cursor
position by pressing the DELETE button.
4. When you have finished writing a name for the
new folder, press F‐2 (SAVE) to confirm. The "Are
you sure?" message will appear. Press ENTER to
confirm, or EXIT to abort.
PAGE 3 - COPY
In this page you can copy single files (i.e., midifiles of
Jukebox files), whole folders (generic or ".SET" fold‐
ers), or a generic folder's content. Note that you can
copy data only inside the same card.
To preserve the data structure integrity, during Copy
operations you can't open a ".SET" folder, and copy
one of its files. You can only open generic folders.
Press SD CARD and use the MENU or PAGE buttons
to reach this page.
Copying a whole folder or folder's content
You can copy a folder (generic or ".SET") into a differ‐
ent folder. If selecting the <current dir> item, you can
copy the current folder's content, without copying the
folder itself. If copying a whole folder, a new folder
with the same name is created at the target location.
Note: During the Copy procedure, you can't open a ".SET"
folder. You can, anyway, open any generic folder.
1. Insert the card into the card slot.
2. Press F‐1 to scan the card and show the file list.
3. Move the folder that you want to copy to the first
line of the display. If it is contained in another
folder, use the F‐3 (OPEN) button to open it. Press
F‐4 (CLOSE) to go back to the previous hierarchic
level.
To copy just the current folder's content, move the
<current dir> item to the first line of the display.
4. Once the item to copy is on the first line, press F‐2
(COPY) to confirm the item selection. The win‐
dow's header changes from "Copy from" to "Copy
to".
5. Move the target folder to the first line in the dis‐
play.
• To copy into an existing generic folder (not a
".SET" folder), select that folder.
• To copy into the current folder, select the <current
dir> item.